|
Air Conditioning Repair & Service
- Test system for proper Freon.
- Test Freon for moisture contamination.
- Test Freon for air contamination.
- Clean condenser fins, as required.
- Inspect and adjust A/C operation.
- Inspect all visible A/C components for leaks and add Freon Dye, as needed.
- Test antifreeze for proper mix.
|
|
|
|
Brake Fluid Flush
- Check brake fluid for moisture and contamination.
- Inspect all hydraulic lines and hoses.
- Inspect calipers and wheel cylinders.
- Inspect master cylinder and cap.
- Flush old brake fluid out of master cylinder, calipers and wheel cylinders until clean.
- Add new brake fluid to master cylinder.
- Road test vehicle for proper brake operation.
|
|
|
|
Fuel Injection Service
- Clean fuel injectors.
- Clean ISC / ASC motor, as required.
- Clean throttle body air intake.
- Visually inspect fuel lines and fuel rail.
- Pressure test fuel pump.
- Test and visually inspect fuel pump, pressure regulator, vacuum lines and connections.
- De-carbonize intake manifold.
- De-carbonize intake and exhaust valves.
- De-carbonize combustion chamber and pistons.
- We also work on carburetors.
|
|
|
|
Brake Repair, Inspection And Service
- Visually inspect hydraulic system for leaks and condition.
- Remove all wheels and inspect brake linings, brake hardware and wheel cylinders.
- Remove brake dust and de-glaze brake shoes.
- Adjust brakes.
- Adjust parking brake.
- Lubricate backing plate and adjust hardware.
- Road test vehicle for proper brake operation.
|
|
|
|
Auto Electrical System Analysis, Repair &
Service
- Inspect battery connections.
- Charge battery to full capacity.
- Lead test battery and record readings.
- Inspect alternator belt and adjust, as required.
- Perform alternator output test and record readings.
- Perform starter draw test and record readings.
- Perform test for draw on electrical system and record readings.
|
|
|
|
Engine Repair And Performance Service
- Test drive vehicle while monitoring computer systems, check for computer codes.
- Check past history of vehicle maintenance.
- Test ignition system, both primary and secondary.
- Test fuel system for fuel volume, pressure, and quality.
- Check air intake system for cleanliness and functionality.
- Consult with customer concerning vehicle needs.
|
|
|
|
Power Steering Fluid Flush
- Road test for power steering operation.
- Inspect system for power steering leaks.
- Flush power steering lines, pump, gear box, and/or rack and pinion.
- Flush out all contaminated power steering fluid and replace with clean fluid.
- Install power steering additive to revitalize seals and O-rings.
- Road test vehicle for proper power steering operation.
|
|
|
|
Wheel Alignment
- Inspect suspension components for wear.
- Adjust caster and camber, if provided by manufacturer.
- Adjust toe-in and center steering wheel.
- For THRUST ALIGNMENT also compensate for rear wheel tracking.
- For FOUR WHEEL ALIGNMENT also set rear wheel camber and toe-in as provided by manufacturer.
- Road test vehicle for proper steering operation and wheel alignment.
|
|
|
|
Transmission Repair And Filter Service
- Road test for engine performance, transmission operation and shift patterns.
- Inspect condition of transmission fluid, mounts, and linkage.
- Inspect transmission, cooler, and cooler lines for leaks.
- Remove transmission pan, clean pan, replace filter, and replace pan gasket.
- Adjust bands and throttle linkage, as required, refill transmission.
- Road test vehicle for proper transmission operation.
|
|
|
|
Transmission Fluid Change
- Add transmission cleaning chemical.
- Road test for engine performance, transmission operation and shift patterns.
- Flush transmission, cooler, cooler lines, valve body, and torque converter.
- Flush out all contaminated transmission fluid and replace with clean fluid.
- Install transmission additive to revitalize transmission seals and O-rings.
- Road test vehicle for proper transmission operation.
|
|
|
|
Cooling System Power Flush
- Pressure test cooling system for leaks.
- Flush engine, radiator and heater core.
- Bring antifreeze to -35 degrees.
- Balance coolant pH level to between 9.8 and 10.5.
- Visually inspect radiator cooling fan for proper operation.
- Visually inspect heater and A/C operation.
|
|
|
|